C7769-60182 Designjet 24" 500 / 510 / 800 Carriage Belt
HP Designjet 500, 510, 800 Belt For 24" Print Width Plotters
FREE SHIPPING (USA only)
BEFORE YOU ORDER: Please make sure you select the right length of belt. Although this belt is for a 24-inch machine, the actual length of the belt is longer than 24 inches. If your machine has a maximum print width of 42", you need the "42-inch" belt.
LPS Brand Designjet Belts are the ONLY Belts Made in the USA
Black HP Designjet 800 and HP Designjet 500 carriage belt connects the carriage to the motor. It runs the length of the plotter and moves the carriage left and right. This belt is for the 24" print width HP 800 plotter and HP 500 plotter.
*Note: Inches refer to maximum width of paper plotter uses, not length of the belt itself*
All LPS brand belts are High Density Polyurethane and DuPont Kevlar, and are the only Designjet belts made in the USA.
Note: The price of this part has been lowered by removing the plastic tensioner wedge. The tensioner rarely or never goes bad from wear.
We Also Recommend
Belt replacement went well especially since LPS provides the information required to do this correctly.
excellent shipping time, processing time. Overall great to work with.
I bought a replacement belt through the LPS website while watching the LPS video on YouTube. LPS was very easy to deal with. They answered my questions promptly. The Belt arrived quickly. The video was great; it took the viewer through the disassembly, belt installation and reassembly of the plotter. The camera work was very good; it showed what Bob was talking about and zoomed in to see detail where required. The video showed where every screw was located, but didn't waste the time showing every screw being removed.
Has a shiny tint to it...should last longer then oem. Thanks!