Quality Parts for the DesignJet Z6200, Z6600, and Z6800
The DesignJet Z6200, Z6600, and Z6800 are heavy-duty production plotters trusted by graphics pros, photo labs, and CAD shops worldwide. When something goes wrong, downtime gets expensive in a hurry. That's where we come in. LPS Computer specializes in HP DesignJet replacement parts, and we stock the components HP no longer supports, including parts produced from our own injection molds.
Common DesignJet Z6600 parts and Z-series replacement components we carry include:
- Ink tube systems for 42" and 60" plotters (new and rebuilt)
- Service stations, primer assemblies, and drop detectors
- Printheads, printhead recovery kits, and cleaning solutions
- Formatters, main board PCAs, and OMAS controller cards
- Hard disk drives with a lifetime warranty
- Control panels, interconnect boards, and memory modules
- Carriage assemblies, carriage motors, and encoder strips
- Power supplies, vacuum fans, and aerosol fans
- Cutters, spindles, platens, and pinchwheel media levers
- Partially-used OEM HP 771A ink cartridges (55% full minimum)
Troubleshooting Your DesignJet Z6200, Z6600, or Z6800
Before ordering a part, take a few minutes to diagnose the root cause. Most issues on the Z6 series trace back to a familiar set of components:
- Print quality problems: Usually printheads, drop detectors, or service station components
- Ink system errors (21:xx, 81:xx, 86:xx): Typically, the ink tube system, primer assembly, or ISS
- Carriage and scan-axis errors: Often, the carriage motor, encoder strip, or belt tensioner
- Paper handling and cutter errors: Check the cutter, OMAS module, and media presence sensor
- System freezes or boot failures: Frequently, the formatter, hard disk drive, or main board PCA
Our error code guide for DesignJet Z6200, Z6600, and Z6800 walks you through the most common faults, and the downloadable service manual covers full diagnostic procedures. If you're still stumped, give us a call. Our certified DesignJet techs have decades of hands-on plotter experience.
Frequently Asked Questions
Are DesignJet Z6200 parts compatible with Z6600 and Z6800 models?
Many parts are interchangeable across the Z6200, Z6600, and Z6800—control panels, cutters, color sensors, and 42" spindles, for example. Others (like ink tube systems and hard drives) are model-specific. When in doubt, contact us with your serial number, and we'll confirm compatibility.
Can I install Z6600 repair parts myself?
Yes. Many components are designed for end-user replacement. Our service manual includes step-by-step procedures and diagrams, and our techs are happy to walk you through tricky installs over the phone.
Do you sell new HP 771A ink cartridges?
We carry partially-used OEM HP 771A cartridges (a minimum of 55% full) as a budget-friendly alternative. For brand-new cartridges, we recommend buying directly from HP or an authorized supplies dealer.
Shop DesignJet Z6200, Z6600 & Z6800 Repair Parts
Browse our full selection here and discover how affordable it is to repair your plotter instead of replacing it. Need a recommendation? We're just a phone call away!
