News — printhead replacement incomplete
Printhead Replacement Incomplete on Designjet T and Z Printers
Posted by Tim Wert on
This problem occurs in the following Designjet models: T610, T620, T770, T790, T1100, T1120, T1200, T1300, T2300, Z2100, Z3100, Z3200, Z5200, Z5400. Your printer is in the middle of "preparing print system," and after 20 minutes of waiting, it displays the message "printhead replacement incomplete." You power the machine down, and back on, and it still tells you "printhead replacement incomplete." Very often, this is caused by insufficient ink supply. If you are using non-HP brand ink cartridges, install new HP cartridges. If any of the ink cartridges is below 40% full, replace that cartridge. If there are any pockets...
- 0 comment
- Tags: Designjet T1100, Designjet T1200, Designjet T1300, Designjet T2300, Designjet T610, Designjet T620, Designjet T770, Designjet T790, Designjet Z2100, Designjet Z3100, Designjet Z3200, Designjet Z5200, Designjet Z5400, HP Designjet, preparing print system, printhead replacement incomplete, replace ink cartridge