HP DESIGNJET 430, 450C Carriage Belt Kit (36") C4706-60082

Part number: C4706-60082

36-inch Designjet 430 / 450C / 700 / 750C complete carriage belt replacement kit with everything you need to do the job right. Illustrated, step-by-step instructions take you from cover removal to a fully calibrated printer, and the specialty tools can be used for future repairs. LPS brand belts are made in the USA from DuPont Kevlar-reinforced, high-density polyurethane. They are precision manufactured and self-lubricating for the best image quality.

At a glance

• Condition: New, LPS brand
• Warranty: Lifetime warranty on the belt

Fits

• HP Designjet 430 36-inch
• HP Designjet 450C 36-inch
• HP Designjet 700 36-inch
• HP Designjet 750C 36-inch

Symptoms this fixes

Common signs that the belt needs replacing:

• System error 86:01 (a worn belt is the main cause on every Designjet)

What's included

• LPS carriage belt
• Non-evaporating synthetic oil for the carriage rails
• 39-piece specialty tool kit
• Photo gloss film required by HP for the calibration
• Illustrated belt replacement and calibration directions
• Complete service manual with removal and installation steps, parts list and error codes (CD or USB drive, your choice)

Note: Choose the belt by the maximum print width of your printer. The belt itself is longer than the print width, so a 24-inch printer uses the "24-inch" belt even though the belt measures more than 24 inches.

Installation

With average mechanical skills you can replace the belt and calibrate the printer in 1 to 3 hours. Allow 2 to 4 hours the first time through.

The replacement procedure can be found in the "removal and installation" section of the service manual for your printer:

• HP Designjet 430 / 450C / 455CM / 488CA service manual
• HP Designjet 700 / 750C / 755CM service manual

Returns

30-day return window. See our returns policy for details.