New HP Designjet Z3200 Replacement/Upgrade 320GB Hard Disk Drive Revision-B
Q6719-67014 replaces Q6719-67010 for Q6718-60047, Q6718-67028, Q6718-67020 Formatters
Guaranteed to fix 08:11 & 79:04 errors which are caused by a defective HDD.
This is a brand new 320GB hard disk drive with Designjet Z3200 Revision B firmware loaded and ready for installation. It mounts on the formatter board which is the plug-in board on the HP Designjet Z3200 that has the Ethernet connector.
The HDD can be replaced in less than 5 minutes with a Philips screwdriver. It is mounted on the formatter board that lifts out of the plotter with 2 thumb screws. Toll free technical assistance is available - 800-959-1575.
System error codes related to the HDD:
This is a new part, never installed on a plotter - blank ID & password, ready to install.
Please note that this hard disk drive will work ONLY on the "B" version of the Designjet Z3200 plotter.The model number is located on the label on the back of the plotter. If the model number ends with a "A" this part is NOT right for your printer.
Used Hard Disk Drives will not work in this printer. When the formatter is installed, the software on the HDD takes on the ID and password from the plotter and cannot be transferred to another Designjet Z3200.