Part number: Q6651-60289

Rebuilt and upgraded ink tube system for 42-inch HP Designjet Z6100 printers. Every seal is replaced with a long-life silicone seal, and every printhead port and check valve is new.

At a glance

• Condition: Rebuilt and upgraded, leak-tested to 3x normal operating pressure
• Warranty: 1-year replacement warranty
• Core refund: $50.00 back when you return your old tube system. Final price after refund: $332.50

Fits

• HP Designjet Z6100 42-inch

Symptoms this fixes

A failing ink tube system usually doesn’t show an error code. The most common signs are:

• Ink leaking from the ink tube assembly
• Ink dripping or spilling onto your prints

What's included

• Ink tube system
• Purgers for priming the ink tubes
• Prepaid return shipping label for your old tube system (USA only)

Not included

Ink tube PCAs. Each PCA has a unique serial ID, so you must reuse your printer's original ink tube PCAs.

Trailing cable. Reuse the trailing cable from your printer.

How we rebuild it

OEM tube seals oxidize, crack and leak over time. Every LPS rebuilt tube system gets:

• Ink tubes chemically cleaned, flushed with pure water and dried with particle-free air
• All 48 buna seals replaced with LPS-designed silicone seals, with an expected lifespan of at least 10 years
• All printhead ports and check valves replaced with new parts (LPS design)
• A leak test at 3x normal operating pressure

Installation

The replacement procedure is on page 296 of the HP Designjet Z6100 service manual.

Core return terms

Returned tube systems must be complete, with no missing parts. Tube systems that have been disassembled or broken apart cannot be repaired without special tooling and new parts, so they have no core value and are not refunded.