HP DESIGNJET Z2100, Z3100, Z3200 Belt Kit (D-size 24" )
HP D-size (24" print width) Designjet Z2100 / Z3100 Carriage Belt Kit
LPS Brand Designjet Belts are the ONLY Belts Made in the USA - The Best in the World
BEFORE YOU ORDER: Please make sure you select the right length of belt. Although this belt is for a 24-inch machine, the actual length of the belt is longer than 24 inches. If your machine has a maximum print width of 44", you need the "44-inch" belt.
1 Carriage Belt (Y-axis) Q5669-60673
(Click here for LPS belt specifications)
2 Non-evaporating synthetic oil for the rails
3 39 Piece Specialty Tool Kit
4 Media required by HP for Calibration
5 Illustrated belt replacement and plotter calibration directions
6 Service Manual with Illustrated Replacement Instructions, Parts List, Error Codes, & more (CD or USB Drive --your choice)
7 Toll Free Phone Support if Needed
8 Free Ground Shipping - USA only
Illustrated, step-by-step instructions take you from cover removal to full repair of your plotter. All specialty tools necessary for the task are included in the kit. The tools can be used for future repairs as well.
- HP Designjet Z2100 Photo Printer 24 inch (Model Q6675A)
- HP Designjet Z2100 Photo Printer Revision C 24 inch (Model Q6675C)
- HP Designjet Z3100 Photo Printer 24 inch (Model Q5669A)
- HP Designjet Z3100ps Photo Printer 24 inch (Model Q5670A)
- HP Designjet Z3200 Photo Printer 24 inch (Model Q6718A)
- HP Designjet Z3200ps Photo Printer 24 inch (Model Q6720A)
- HP Designjet Z2100 Rev.D Photo Printer 24 inch (Model Q6675D)
- HP Designjet Z3200 Rev.B Photo Printer 24 inch (Model Q6718B)
- HP Designjet Z3200ps Rev.B Photo Printer 24 inch (Model Q6720B)
1. How difficult is it to replace the carriage belt?
If you have average mechanical skills, and the instructions are followed, most people can replace the belt and calibrate the printer without calling for technical assistance. If you have apprehensions about doing the replacement yourself, perhaps you can find another person with technical skills to help you.
2. How long will it take to replace the belt?
An experienced technician can do the work in less than an hour. Allow yourself 2 to 4 hours for the first time through.
NASA, JPL, The Goddard Space Center, and many universities buy LPS belt kits. They trust us and you can too.
We Also Recommend
Happy to find a better belt than HP makes, as well as the proper tools and instructions to do the job right.
We replaced the belt on our Z2100. The video showing how to replace the belt is great. Watching the video is much better then the printed instructions. The only difference is on the Z2100 there is a plastic piece in the left cover that surrounds the left ink cartridge bay that needs to be removed before you can remove the left cover. Also, be very careful about the bushing on the carriage. It isn't held on securely and will fall off and get damaged easily if you are not paying attention to it as you remove and replace the carriage. We had to purchase a new one and almost destroyed it as well. Having the right tools was worth the extra money to us. All in all, other than the bushing, the replacement went well and the belt is working great. Thanks.
The belt replacement on my HP Z3200 took about 3 hours to complete. The written instructions were more involved than required but the YouTube video, which I followed, was easy to use. I'd also caution that when replacing the carriage to make sure that you don't damage the carriage bushing.
I needed to replace the belt on my 24" wide poster printer. They sent me everything I needed with the appropriate instructions--and I was surprised to find that the cost included next-day delivery. I'll buy again when presented with the need.
This is a great kit! You get everything you need to fix your printer. It is not the easiest fix but if you try you can get the job done!