Q6687-67013, Q6687-60057 Designjet T610, T1100 44" Main PCA & Power Supply

$ 314⁹⁶
Save $ 34

✉ Have a question about this part? Email us or call 760 749 1580.

✓ Same-day shipping from the USA
✓ Free technical support
✓ We accept all major credit cards and PayPal
✓

Part number: Q6687-60057 (also Q6687-67013)

Refurbished main board and power supply for 44-inch HP Designjet T610 and T1100 printers.

At a glance

Condition: Refurbished, live-tested, with a new fan installed in the power supply
Warranty: 12 months

Fits

HP Designjet T610 44-inch
HP Designjet T1100 44-inch (including PostScript)

Symptoms this fixes

System errors related to the main PCA and power supply:

Error 01.0:YZ
Error 02.1:YZ (primary cause: a faulty carriage PCA)
Error 03:10
Error 08:11 (primary cause: a faulty formatter or a pinched control panel ribbon cable)

Not included

Formatter board. The formatter is always a separate component from the power supply and the main PCA. Reuse yours.

Note: This is the complete assembly: main logic board (engine PCA) and power supply together.

Installation

The replacement procedure is in section 6-202 of the HP Designjet T1100 / T610 service manual.

Returns

30-day return window. See our returns policy for details.

We Also Recommend

UPDATED Printhead Recovery Kit for HP 70, 72, 73, Printheads

$ 63⁸⁹ Save $ 7.10

Universal Cleaning Solution for HP Printheads

$ 12⁹⁵

Upgraded Printhead Seals ONLY for T and Z Models

$ 31⁹⁵

HP Designjet T610, T620, T1100 T1120 24" Carriage Belt Kit Q5669-60673

$ 112⁰⁰

Belt Kit Light T610, T1100, T620, T1120 (D-size 24")

$ 75⁵⁹ Save $ 8.40

gostei muito

sou do Brasil e gostei muito de negociar com vocês. Essa foi minha primeira compra na sua loja e gostei do atendimento e envio rápido. Só não gostei porque fui taxado na alfandega e tive que pagar imposto alto mais não tem nada a ver com voçês.

The formatter errored out as soon it was powered on but reinstalling it later worked I’m not sure if I have confidence in the part lasting very long

Hi Thomas,
I see you ordered the formatter and the main PCA/PSU. When you replace the formatter, the machine will boot to error 79:04. This is a normal part of the pairing procedure. Every time you boot thereafter, the machine should function normally.

Fixed my 08:11 error

A T1100 with an 08:11 error; don't be fooled that it's the front panel, it's either the main PCA, formatter or hard disk. In my case it was the main PCA. Part worked flawlessly. LPS is extremely prompt and courteous!