Menu
Cart 0

HP DESIGNJET 500, 800 Carriage Belt Kit (D-size 24")

  • $ 8550


HP Designjet 500, 800 Carriage Belt Kit For 24" Print Width Plotters C7769-60182

LPS Brand Designjet Belts are the ONLY Belts Made in the USA - The Best in the World
Lifetime Warranty

 

FREE SHIPPING

BEFORE YOU ORDER: Please make sure you select the right length of belt. Although this belt is for a 24-inch machine, the actual length of the belt is longer than 24 inches. If your machine has a maximum print width of 42", you need the "42-inch" belt. 

All LPS brand belts are High Density Polyurethane and Kevlar, and are the only Designjet belts made in the USA.
A worn belt is one possible cause of System Error 86:01
Designjet 500 belt replacement video
The kit has everything you need to do the job right:

1 Carriage HP 800 & 500 Belt (Y-axis) C7769-60182
(Click here for LPS belt specifications)
2 Non-evaporating synthetic oil for the rails
3 39 Piece Specialty Tool Kit
4 Medium required by HP for Calibration
5 Illustrated belt replacement and plotter calibration directions (CD)
6 Service Manual with Illustrated Replacement Instructions, Parts List, Error Codes, & more (CD or USB drive --your choice)
7 Toll Free Phone Support if Needed
Free Ground Shipping - USA only

Illustrated, step-by-step instructions take you from cover removal to full repair of your plotter. All specialty tools necessary for the task are included in the kit. The tools can be used for future repairs as well. Comes with all HP Designjet 500 and 800 belt replacement parts

Compatible with:

  • HP DesignJet 500 Printer - 24” Model (P/N C7769B)
  • HP DesignJet 500PS Printer - 24” Model (P/N C7769C)
  • HP DesignJet 500Plus – 24” Model (P/N C7769F)
  • HP DesignJet 500Mono – 24” Model (P/N C7769E)
  • HP Designjet 510 – 24” Model (P/N CH336A)
  • HP Designjet 510ps – 24” Model (P/N CJ996A)
  • HP DesignJet 800 Printer - 24” Model (P/N C7779B)
  • HP DesignJet 800PS Printer - 24” Model (P/N C7779C)

FAQ
1. How difficult is it to replace the carriage belt?
If you have average mechanical skills, and the instructions are followed, most people can replace the belt and calibrate the printer without calling for technical assistance. If you have apprehensions about doing the replacement yourself, perhaps you can find another person with technical skills to help you.

2. How long will it take to replace the belt?
An experienced technician can do the work in less than an hour. Allow yourself 2 to 4 hours for the first time through.

NASA, JPL, The Goddard Space Center, and many universities buy LPS belt kits. They trust us and you can too.

Designjet 500 D-size belt replacement kit

We Also Recommend

Customer Reviews

Based on 41 reviews
95%
(39)
5%
(2)
0%
(0)
0%
(0)
0%
(0)
D
D.L.
Carriage belt

This is the second time I replaced the carriage belt. The first time without any instructions.
Change the belt with out any problems a lot easier to do the job with instructions, the only problem is the calibration paper sent was not long enough to do the job.
I tried using stock 24" wide sheet and keep getting error saying paper not wide enough.

E
E.Z.
As Advertised

Quick Shipping, video great help, bought carriage belt kit which needs one more piece T8 tip. Otherwise was a slightly tough DYI experience but the online video was the map to success. During the install I found the trailing cables to be defective so I ordered new ones. Keep track of your screws - I taped them to the parts as I removed them. Advise use patience and follow video very closely.

J
J.C.
HP DesignJet 500 belt replacement kit

Not the easiest repair job (that's HP's fault) ... LPS youtube video (38 min.) is fantastic. Just follow it (pausing frequently) and you will get the job done. Actually have done 2 now - 1st one took me a little under 2 hours, 2nd under 1 hour. Great product. In short, for under $100 and a couple of hours of time, you go from having a huge worthless plotter, to one that is back in business ...

T
T.C.
New Life for DesignJet 800

The 800 Carriage Belt Kit gave me all the tools, supplies, and instructions I needed to replace the old belt in my DesignJet 800. It is up and running like new again for less than $100.00. Excellent repair kit from DesignJet Store.

J
J.H.
I'm now a pro

Great kit. Everything I needed was included. This kit, accompanied with the YouTube video makes everyone a pro.