HP DESIGNJET T610, T1100, T1120 Belt Kit (44" plotters)
HP Designjet T610 / T1100 / T620 / T1120 Carriage Belt Kit 44"
LPS Brand Designjet Belts are the ONLY Belts Made in the USA - The Best in the World
BEFORE YOU ORDER: Please make sure you select the right length of belt. Although this belt is for a 44-inch machine, the actual length of the belt is longer than 44 inches. If your machine has a maximum print width of 24", you need the "24-inch" belt.
1 Carriage Belt (Y-axis) Q6659-60175
(Click here for LPS belt specifications)
2 Non-evaporating synthetic oil for the rails
3 39 Piece Specialty Tool Kit
4 Media required by HP for Calibration
5 Illustrated belt replacement and plotter calibration directions
6 Service Manual with Illustrated Replacement Instructions, Parts List, Error Codes, & more (CD or USB Drive --your choice)
7 Toll Free Phone Support if Needed
8 Free Ground Shipping - USA only
Illustrated, step-by-step instructions take you from cover removal to full repair of your plotter. All specialty tools necessary for the task are included in the kit. The tools can be used for future repairs as well.
- HP Designjet T1100 Printer 44 inch (Model Q6687A)
- HP Designjet T1100ps Printer 44 inch (Model Q6688A)
- HP Designjet T610 Printer 44 inch (Model Q6712A)
- HP Designjet T1120 Printer 44 inch (Model CK839A)
- HP Designjet T1120ps Printer 44 inch (Model CK840A)
1. How difficult is it to replace the carriage belt?
If you have average mechanical skills, and the instructions are followed, most people can replace the belt and calibrate the printer without calling for technical assistance. If you have apprehensions about doing the replacement yourself, perhaps you can find another person with technical skills to help you.
2. How long will it take to replace the belt?
An experienced technician can do the work in less than an hour. Allow yourself 2 to 4 hours for the first time through.
NASA, JPL, The Goddard Space Center, and many universities buy LPS belt kits. They trust us and you can too.
We Also Recommend
The video is the best part, makes the replacement very easy.
The kit was great the instruction were not as good as the YouTube demo. You might consider adding th video to the CD. With the video it was a painless replacement.
EVERYTHING WAS GREAT
Video on repair was great. Belt correct and delivered on time. Took a few hours to repair but I saved myself from buying a new plotter or expenses "house call"
I’m sure the belt is good quality, time will tell. The video “how-to” by Bob was the most valuable part of this whole deal (free). I watched it and saw I could do it. I ordered the belt and watched the video again to do it. Made things go a lot smoother. Ended up needing rear bearing as well.check that first (see other video) and order with the belt. Toolkit really made things easier too!