HP DESIGNJET 250C, 330, 350C Carriage Belt Kit (D-size 24")
HP Designjet 330 & 350C Carriage Belt Kit, D-size
C4705-60082 for 24" print width plotters
LPS Brand Designjet Belts are the ONLY Belts Made in the USA
BEFORE YOU ORDER: Please make sure you select the right length of belt. Although this belt is for a 24-inch machine, the actual length of the belt is longer than 24 inches. If your machine has a maximum print width of 36", you need the "36-inch" belt.
All LPS brand belts are High Density Polyurethane and Kevlar, and are the only Designjet belts made in the USA.
1 Carriage Belt (Y-axis) C4705-60082
(Click here for LPS belt specifications)
2 Non-evaporating synthetic oil for the rails
3 39 Piece Specialty Tool Kit
4 Medium required by HP for Calibration
5 Service Manual with Illustrated Replacement Instructions, Parts List, Error Codes, & more (CD)
6 Toll Free Phone Support if Needed
7 Free Ground Shipping - USA only
Illustrated, step-by-step instructions take you from cover removal to full repair of your plotter. All specialty tools necessary for the task are included in the kit. The tools can be used for future repairs as well.
1. How difficult is it to replace the carriage belt?
If you have average mechanical skills, and the instructions are followed, most people can replace the belt and calibrate the printer without calling for technical assistance. If you have apprehensions about doing the replacement yourself, perhaps you can find another person with technical skills to help you.
2. How long will it take to replace the belt?
An experienced technician can do the work in less than an hour. Allow yourself 2 to 4 hours for the first time through.
NASA, JPL, The Goddard Space Center, and many universities buy LPS belt kits. They trust us and you can too.
We Also Recommend