CH538-67018 Designjet Z5200, Z5400 44" Carriage Belt
HP Designjet Z5200 and Z5400 44" Carriage BeltCH538-67018
BEFORE YOU ORDER: Please make sure you select the right length of belt. Although this belt is for a 44-inch machine, the actual length of the belt is longer than 44 inches. If your machine has a maximum print width of 24", you need the "24-inch" belt.
A worn belt is one possible cause of System Error 86:01
HP Designjet belt that connects the carriage to the carriage motor. It runs the length of the plotter and moves the carriage left and right. This belt is for the 44" print width HP Designjet Z5200 and Z5400 printers.
When replacing the belt, or removing the carriage from the printer for any reason, be careful not to damage the plastic belt-retention posts on the carriage. If the post is broken on your carriage, you can fix the carriage using this part.
Note: The price of this part has been lowered by removing the tensioner assembly. The tensioner rarely goes bad from wear, and despite hearsay, you do not have to replace the tensioner when you replace the belt. If you do require the tensioner, it is available here.
We Also Recommend